หน้าแรก > Air Compressors

HRA30-25

Brand :

Product Group :

Air Compressors

Download

Overview

SPECIFICATION
This is a two-stage high pressure air pump with air cooling and electric motor drive. The motor and the air pump are installed on the air tank including automatic equipment as follows

PUMPING UNIT

4 cylinders
Air cooling that has split fins at the cylinder block and a flywheel with a fan.
Usable air pressure 125 -175 psi • Maximum air pressure at 61.50 CFM (at 175 psi)
There is a Centrifugal Unloader Start System.
Air Intake Filter and Silencer are included.

ELECTRIC MOTOR

"ELTEMEK" brand No.AIS-112M-4 or equivalent
380 Volt electric system with 50 Hz and 3 Phases
30 horsepower
Insulation class F
Delta-star set (Option)

** ** There is an additional expense.

AIR TANK

Horizontal tank with the capacity by not less than 250 gallons (1000 liters)
Designed for the pressure that is not less than 300 psi
Passed a test at a pressure of 400 psi from an acceptable institute and there is a certified document(option).
Check valve is installed with the internal diameter of 1-1/4"
There is a motor support that can be moved by adjusting including a mechanism for adjusting the belt.

STANDARD ACCESSORY

Magnetic Sw. with 380-volt overload
Safety Valve is certified with a standard from an institute that is acceptable (ASME)***.
Manual drain valve, a brass ball valve type or a glove valve
Pressure Switch
Pressure Gauge can register the pressure from 0-300 psi
There is the oil level display (a peephole to see the level at the machine room).
V-Belt & Belt Guard